Outlets with Energy Meter Z-Wave:
This outlet contains the latest Z-Wave technology and you can control your lamps or other electronic devices on/off. You can use loads up to 1800W. Thanks to the Z-Wave mesh networking technology, this outlet serves as a repeater for the Z-Wave signal. It is designed to be as small as possible and if you use it in a standard 2-way wall outlet, you still may use a regular plug in the second socket. The outlet is very easy to install and integrate into Telldus Live! As soon as you have installed it, it is easy to create schedules and events that can control the devices you choose to connect.
Despite its small size, it has a built-in energy meter. In Telldus Live!, you may easily monitor the energy consumption and let this value control your devices and/or notify you depending on the value. Smart, isn’t it?!
For indoor use only.
- Voltage: 230V~50Hz
- Maximum load: 1800W (Resistive load)
- Current: 8A
- IP class: IP20
- Frequency: 868.42MHz (EU)
- Z-Wave Chip: 5th Generation Z-Wave Plus
- Range up to 30 meter
- Standby consumption <1W
Using these outlets with Telldus Live! requires that you have a TellStick with Z-Wave support (ZNet Lite V1/V2) connected to your router.
Indoor/Outdoor Thermo/Hygro Sensor:
This sensor allows you to keep track of temperature and humidity. Suitable for monitoring, for example, the guest house or the food storage. The signals can be picked up by a TellStick so you can let the sensor control other devices in your smart home. The cable to the probe is approximately 85 cm long.
You can keep track of the values in your smartphone using the Telldus app. The sensor is also equipped with dual displays so that you can read all measurement values directly.
- Measurement range: Temperature -40°C – +50°C, Humidity 20% – 95%
- Accuracy: Temperature +/-2°C, Hunidity +/-5% RH
- Eight channels (selectable by DIP switch)
- Frequency 433.92 MHz
- Range up to 20 meters
- Powered by 2×1.5V AAA batteries (not included)
Using this sensor with Telldus Live! requires a TellStick that can receive 433 MHz signals (Net/Net v2/ZNet V2) connected to your account. Please note! The product is NOT compatible with TellStick ZNet Lite v1. Please check which model of TellStick you have before ordering.