The POPP radiator thermostat is mounted on wall heating valves and controls them by a motor. The device accepts a setpoint that is either set manually using local buttons on the device or wirelessly using Z-Wave. Beside setting a desired temperature the device will support special heating schemes, such as energy saving and frost protection. A small LCD panel on the device displays the set temperature. An internal temperature sensor measures the actual temperature and reports to the control center.
The thermostat also allows further intelligent functions such as detection of open windows with shift to energy saving mode or a valve training function to ensure that valves are still operational after longer periods.
The POPP thermostat can be mounted with few movements to valves with standard M30x1.5 connector or RA2000 (Danfoss snap in). The device expects a regular radio connection to the IP gateway for status message exchange.
This Popp thermostat also has an integrated temperature sensor which reports measured temperature to Telldus Live! via your TellStick.
- Thermostat for water-based radiators
- Integrated temperature sensor
- Local control buttons
- LCD display (set temperature)
- For valves with standard M30x1.5 connector (30×1,5) or RA2000 (Danfoss snap in)
- Low-noise motor
- Child protection
- Explorer Frame Support
- Wireless technology: Z-Wave
- Dimensions: 51 x 51 x 71 mm
Depending on the type of radiator you have, additional valve adapter might be needed.
Please note! Using this product with Telldus Live! requires that you have a TellStick with Z-Wave support (ZNet Lite V1/V2) connected to your router.