Thermostat Heatit Z-Wave

1499 kr

Heatit Z-Wave thermostat is an electronic thermostat for floor heating that fits in a standard wall box.

SKU: 312633 Categories: ,

Product Description

Heatit Z-Wave Thermostat is an electronic thermostat for floor heating. It fits into a standard wall box for easy installation. The thermostat has a built-in Z-Wave chip that can be connected to various home automation systems such as Telldus Live!*, Fiber, Zipato etc.

The thermostat is equipped with a single pole switch and fits most of the System 55 frames on the market (eg Elko RS16, Schneider Exxact, Gira and Jung). It manages loads up to max 16A / 3600W at 230V. At higher loads, the thermostat must control a contactor. It can be connected to wired external sensors. It has the capacity to have up to 8 associations (relays, wall plugs, etc.).

The thermostat is designed for electronic heating.

Technical Data:
Protocol: Z-Wave Plus, 868.42 MHz
Rated Voltage: 230V ~ 50 / 60Hz
Max load: 3600W (resistive load), 750W self-limiting cable
Max power: 16A
Power Consumption: 1.5W
Regulator: Time cycle 0 – 30 min
Min / Max Installation Stamp: -20 ° C – 40 ° C
Min / Max Usage Temp: 5 ° C – 40 ° C
Temperature range: Floor sensor & amp; External sensor: 5 ° C – 40 ° C
Switch: One-pole
IP Class: IP20

For more information, see the manufacturer’s web site .

* Telldus Live! currently does not support scheduling and event checking for thermostats.

Additional Information

Weight 0.220 kg
Dimensions 110 x 110 x 80 mm


Manual »

Product Sheet »