Upcoming
In testing, not yet in the app stores. Content and timing may change before release.
New
- Moving from the old Flow app: if your Bluetooth backup could belong to more than one home, the app now asks which home to restore it to.
Fixed
- Devices in rooms and category lists are now sorted alphabetically.
- Renaming Bluetooth devices now works reliably, also for devices that only use Bluetooth.
- Restoring a backup from the old Flow app is more reliable: devices end up in the right home, are merged instead of replaced, and devices you have deleted stay deleted.
- The restore card on the Start screen is easier to tap and looks right in dark mode.
New
- Multisensors (for example Aeotec MultiSensor 6) now show light level on sensor cards and on the motion and climate pages.
- Routines can now be triggered by light level (lux).
Improved
- The motion sensor page is easier to read and now also shows UV index.
- Pull to refresh on Start now also reloads your homes and rooms.
Fixed
- The Rooms tab shows a loading indicator, and a retry option if your homes can't be loaded.
- Saving after rearranging always exits rearrange mode, and tells you if saving failed.
New
- Bluetooth devices can now be added without a hub.
- Colour temperature now works for Bluetooth lights, including in routines and scenes.
Improved
- With several homes, your phone connects to the Bluetooth network of the home you have selected.
- Flow devices can still be controlled over Bluetooth while the Flow is offline.
- Scenes now reach Flow devices directly over Bluetooth, and new Flow devices show up in the list right away.
- Pairing only offers supported products, and cancelling a pairing no longer disconnects your phone from the home.
Fixed
- Self-learning 433 MHz plugs (Telldus, Proove, Cleverio and others) now get their own unique code when added, so they no longer switch on and off together.
- Code switches and doorbells (Nexa, Rising Sun, Goobay, Sartano, IKEA Koppla) now show the right settings when added.
- Household members are no longer removed from a shared home after 30 days, and are no longer sent through onboarding.
- Signing out now fully signs you out, and added accounts stay signed in.
- Power triggers on energy-metering plugs can be saved again.
- Switching between homes works again in cases where it previously failed.
Released
Available in the App Store and Google Play.
New
- Set up a hub 2 on Wi-Fi instead of Ethernet, or switch an existing hub 2 over to Wi-Fi. Requires hub 2 firmware 4.0.4.
Fixed
- The app could get stuck showing a "camera not available" error.
- A crash with certain group setups.
Fixed
- Water leak sensors now show up correctly, with leak status, history and statistics.
- Leak, smoke, door/window and motion sensors now update instantly when triggered.
New
- Support for doorbells, with a new ring history view.
Improved
- Wi-Fi setup for Matter devices now prefers 2.4 GHz networks.
- Your hub's location on the map now saves instantly.
- Favourite sensors now show CO₂ level and when they were last updated.
Fixed
- Some on/off switches were shown as door/window sensors.
- Various stability improvements.
New
- Multi-button remote controls: Matter and Zigbee scene switches and button remotes now show each button separately, so you can choose exactly what every button does.
Fixed
- Some smart plugs and other Zigbee/Matter devices (such as frient SPLZB-141) didn't respond to on/off commands.
New
- When pairing a Matter device, you can now choose which Wi-Fi network it joins.
Improved
- The add-device screen has the official Matter logo and a clearer icon for 433 MHz devices.
Fixed
- The live connection to your hub could drop after switching accounts.
- A blank screen and unresponsive taps when viewing uncategorised devices in a Space.
New
- Local control: when your phone is on the same network as your hub 2, on/off, dimming, colour temperature and colour commands go straight to the hub over your local network instead of via the cloud. If the local connection fails, the app automatically falls back to the cloud.
- Local MQTT on hub 2: a new setting in hub settings lets you turn on the hub's local MQTT broker. Because it opens an unencrypted port on your network, the app asks you to confirm first.
Improved
- A "Check for updates" button on the hub 2 update page, showing when it last checked.
- A hub 2 is no longer mislabelled as "TellStick" during activation.
- Clearer, translated error messages if hub activation fails.
- Device and sensor settings now show which hub they are connected to.
Fixed
- The app could crash when deleting a routine.
Improved
- A smoother, more responsive app, especially on Android with many Bluetooth devices nearby.
- Bluetooth scanning pauses when the app is in the background.
- Hub updates now come from the stable release channel.
Fixed
- Removing a climate sensor that was also registered as a device.
